Our Services


Chemial Cleaning removes sludge, rust, fouling, chemicals and residue on metal parts and ensues dryness before tagging equipment back in service. Chemical Cleaning is quicker and takes a lot less labor, giving you budgetary cost effectiveness. We utilize our own chemists and digital lab devices to determine the proper chemicals for each job.

Chemical cleaning treatments are adaptable to many industrial requirements:
  • Alkaline Boil-out
  • Boilers and Blast Furnaces
  • Chemical Cleaning Oxygen Services
  • Cooling systems
  • Condensers
  • Degreasing
  • Digesters
  • Glass Lining
  • Heat Exchangers
  • Hot Oil Flushing
  • Lines
  • Nozzles
  • Passivation of Stainless Steel
  • Piping
  • Pre-cleaning of New Facilities
  • Pre-commissioning Flushing of Piping and Generators
  • Rail Car Cleaning
  • Reactors
  • Storage Tank (AGST and Below Ground)
  • Vapor Phasing
  • Vats
  • Water Lines
We have a large and diverse fleet of hydro blasting equipment that can sustain pressures up to 40,000 PSI to safely and efficiently cut through virtually any material and structure. Water and aggregates are combined to cut steel, concrete and refractory, which is often faster than conventional cutting methods. Other performance benefits include:
  • Safe for cutting in volatile atmospheres
  • Uniformity of cuts and precision bevels, with no effect on metallurgy
  • Able to cut a wide range of materials
  • Able to cut a combination of materials in a single pass
Safe Alternative to Hot Cutting in Hazardous Areas The ability to effectively control and harness the power of the water jet (coupled with no significant heat generation) makes this application a safe, effective and convenient alternative to hot cutting, providing a practical solution for completing operations adjacent to 'live' plant in potentially hazardous areas. Zoned Specialist Equipment We own an extensive range of zoned specialist equipment including a comprehensive selection of manipulators, tracking and accessories, capable of efficiently cold cutting linear, circumferential and circular cuts of steel plate, pipework, bulkheads, decks curved tanks/vessels and solid composite material.
As a natural extension to our industry-leading scaffolding services and work access solutions, SMV also offers Rope Access, an innovative alternative when traditional access methods are not feasible. Our specialist rope access teams provide the means to reach otherwise inaccessible locations in a safe, proven and cost effective way, with little impact to client’s projects. SMV’s Rope Access services can be utilized in all of the industries we serve as an independent solution, in combination with conventional access methods, or as a part of our integrated multi-service package, including:
  • Construction
  • Maintenance
  • Repair
  • Insulation Application
  • Coating & Painting Application
  • Fireproofing Application
  • Leak Detection & Repair Services (LDAR)
  • Other Related Specialty Services.


Hydro Blasting is an extremely versatile and effective method of removing paint,metal coatings,rust,soluble salts and other contaminants from steel surfaces. It is environmentally friendly. It is considered to be an emerging technology which will, in the near future, rival and possibly replace traditional open abrasive blasting methods. We provide hydro blasting services up to 40,000 psi for pipe internal/external , structure , ship hull , tank internal/external & ect

This process is efficient in the removal of mill scale, new or old coatings & rust We provide abrasive blasting for pipe internal &external,structure, new steel plate &beams,turbine, ship hull &ect
The standard grades for abrasive blast are:

  • Sa 1 Light blast cleaning.
  • Sa 2 Thorough blast cleaning.
  • Sa 21/2 Very thorough blast cleaning.
  • Sa 3 Blast cleaning to visually clean steel.

The following are a few common types of abrasives:

  • Wet abrasive blasting
  • Dry Ice Blasting
  • Garnet Blasting
  • Aluminium Oxide Blasting
  • Steel Grit and Shot
  • Silicon Carbide
  • Copper Slag
  • Dry Soda Blasting &ect

Hand Tool Cleaning Loosely adhering mill scale, rust and old paint coatings may be removed from steel by hand wire brushing, sanding, scraping and chipping. However, these methods are incomplete and always leave a layer of tightly adhering rust on the steel surface.

Power Tool Cleaning Generally power tool cleaning is more effective and less laborious than hand tool cleaning for the removal of loosely adhering mill scale, paint and rust. Power wire brushes, grinders, sanders and impact tools such as needle guns are all commonly used. Mechanical bristle blasting is also an effective method and can produce a surface profile of up to 75µm (3 mils) in areas where blast cleaning is not feasible.

Pickling and Passivation
Pickling treatments can be used to remove scale and to correct heat tint and as long as the substrate is properly clean and free from any other contamination then it will usually be left passivated once the pickling product has been removed. Again, care must be taken to properly dispose of any waste from pickling. Passive surfaces will require mechanical abrasion (preferably abrasive blasting) in order to ensure a sufficient profile for adhesion of the subsequent coating. COATINGS

  • Corrosion Control
  • Fire Protection
  • Thermal Insulation


We provide high pressure and ultra-high pressureWater jetting services from 3,000 psi to 40,000 psi
Our tools & equipment for :

  • 3-D Tank Cleaning Nozzle
  • Tube Cleaning Nozzle Starting (4mm up to
  • Pipe Internal Cleaning (2 inch up to 180 inch diameter)
  • UHP Water Jetting Pump 30 lpm to 360 lpm at Various Pressure
  • Roto-Fan and ect

High Pressure and Ultra-High Pressure Water Jetting are adaptable to many industrials for cleaning such as :

  • Heat Exchanger Cleaning
  • Boiler Tube Cleaning
  • Main Condenser Cleaning
  • Heavy Lube Oil Tube Cleaning
  • Pipe Internal Cleaning
  • Air Heater Cleaning
  • Pit, Bin and Silo Cleaning
  • Storage Tanks
  • Tank / Vessel
  • Furnaces
  • Sewer Lines and ect
  • Fuel Oil Tank Cleaning

    • We clean fuel oil tanks of various sizes from fuel and oil tanks, grease traps and lift pits in fleet garages, to large storage tanks in power plants. Fuel tanks are entered and cleaned for preventative maintenance, removal of built-up sludge, and during decommissioning.
  • Tank and Vessel Cleaning during Decommissioning and Industrial Renovations
    • We clean tanks during decommissioning and renovation projects. Tanks, which may contain hazardous acids, caustics, chemicals and various product vessels, are entered into and cleaned for safe disposal or movement to another location.
  • Clean Tanks, Vessels, Sumps and Basins
  • Removal of Hazardous and Non-Hazardous Chemicals
  • High Pressure Washing and Hydro blasting from 3,000 psi up to 40,000psi
  • Vacuum Truck, Air Mover, Roll-Off and Tanker Services
  • Waste Management, Transportation and Disposal with Environment Certificate
  • Common storage tank scope of work :
    • Chemical cleaning on industrial process systems to remove residual oils, corrosion products, chemical build-up and other contaminants
    • Hydro blasting to help decontaminate and remove excess waste build-up from tanks, boilers, drum storage areas, plant floors, parking lots, machinery and a variety of other locations
    • Vacuum cleaning to remove heavy sludge and solids that are not broken down by ordinary vacuum units. These units are able to replace previous methods using manual labor.
    • Storing, transporting and disposing of hazardous and non-hazardous chemicals and or product during each tank cleaning

We provides scaffolding services for maintenance, revamp, shutdown, turn around works for oil & gas and industrial sectors, inclusive of onshore & offshore projects. We has vast experience & capability in the design, supply, erect, adapt & dismantle of scaffolding for vessels, towers, flares, reactors, equipment, internal / external tanks, pipe racks etc.

  • Our Market range :
    • Offshore
    • Power Plant
    • Shipyard & Fabrication Yard
    • Refinery
    • Oil Terminals

We supply :

  • Rigger
  • Fitter
  • Scaffolder
    • Supervisor and General Worker
  • Ridding Crew Skill/Unskill
  • Welder
    • TIG
    • ARGON
    • 6G
  • Hydro Blaster
  • General Worker

   We provide steel fabrication services. We have quickly gained a reputation for providing a quality service. We specialize in all aspects of Steel Fabrication and welding for the commercial, industrial, retail & customers in the oil & gas industry. SMV offer a complete service from steel procurement, manufacture, on-site services through to installation.We source material from many direct steel suppliers ensuring quality is always maintained, we also make sure material is always sourced at the right price allowing us to offer a competitive service at all times.
   We also provide a wide range of essential structural and architectural steelwork items used throughout industrial, commercial, agricultural and the wider construction industry.We have the in-house experience to create all kinds of steelwork fabrications to exceptionally high quality standards and with a personalised approach to client service that really delivers what our customers need and expect from a quality fabricator. Our skilled team and fully equipped workshop fabricate a range of metalwork and structures applying decades of hands on expertise creating and fitting architectural and structural elements for superb results.Across our fabrication services we offer our customers an extensive range of finishing options such as priming, shot blasting and galvanising.
   In addition to SMV fabrication and steelwork services we also employ a skilled team of professional fitters. SMV has gained the reputation of providing excellent site problem-solving solutions for all aspects of alterations, modifications, and new installations for a variety of applications in different physical environments. Installation of products if required is carried out with the minimum disruption to other site activities by our experienced installation team, all installation is planned in accordance with all the relevant health & safety legislation.We have supplied specialist on site welding services for a wide range of projects and labour support to complement a customers own workshop personnel during high work loading. Also, thanks to our high standards and rapid response, we enjoy a good relationships with a number of marine operators, supplying fabricators and welding services at short notice for dockside ship repairs and/or modifications.

We provide full electrical solutions on land and sea including the design, manufacture and installation of switchboard and switchgear, motor control centres, control consoles and bespoke electrical components. It is also involved in all aspects of electrical engineering for marine and offshore industries, the MoD, public authorities and many large industries.
Now under new management, SMV continues to deliver the exceptional levels of service that have given the company the fine reputation it has today.